Barrel Pump Supply Coolant for Cold Storage

Model NO.: DASEN-DX
Origin: China
HS Code: 8418692090
Model NO.: DASEN-DX
Origin: China
HS Code: 8418692090

Level control system : level test/ control component use PARKER or DANFOSS

EEV:PARKER/DANFOSSBarrel Pump Supply Coolant for Cold Storage
Unit principle:
Pumps for liquid fluoride is the use of the mechanical function of the pump, transporting cryogenic liquid refrigerant to the evaporator of the refrigeration system. After throttling of low temperature refrigerant liquid, first into a certain liquid volumeof fluorine and certain gas-liquid separation volume bucket, again with f-pump several times to evaporation of cryogenic liquid delivery to the warehouse in the evaporator. Vaporization of liquid evaporator heat and the remaining liquid fluoride returned with vapour suction tube barrel. Gas-liquid separation, gas compressor tosuck, separation and evaporation of the liquid and the equivalent of a new fluid and pump evaporator is fluorine for recycling. Barrel pumps enhance evaporator cooling capacities, ensuring long for fluid, simple, for centralized control, automatedand easy defrost operation and so on.
 
Unit:
Jinan Omori DX series f pump unit imports canned motor pump, the use of moreconvenient for accurate liquid level control system, automatic control system, bringmore economic benefits to the customer.
, Shielded pumps: selection of imported canned motor pump-the secret staircaseg, Empire
A, adopt advanced hydraulic model in Europe, high efficiency, can save users considerable energy consumption;
B, a unique high pressure inner loop structures, ensure the vaporization of liquid fluorine does not;
C, import mask sets, Eddy current losses, roll forming, reliable performance;
D materials, special bearings, extremely high abrasion resistance and corrosion resistance;
E, axial automatic balance, zero axial forces operation, long service life;
F, efficient and simple monitoring and protection device.
 
Second, liquid level control systems: liquid level detection and control units using PARKER, DANFOSS
Liquid level sensor level proportionally into an electric signal and controller work together and then sent to the electronic expansion valve control signal, it is
Display function, feedback and control liquid level of the revolving drum with a stable surface, circular drums is to ensure stability of the oil-rich
Layers, making access to recycling barrels of oil to smooth through gas pipes go back to unit.
 
The control system has the following characteristics:
A, can be remotely monitored and controlled;
B, large cooling capacity range;
C, fast response to changes in the operating conditions for electric valves;
D, fail-safe valve.
 
Electronic expansion valves: selection of PARKER, DANFOSS
A, stepper motors precisely control;
B, high resolution drive Assembly;
C valve body with oil sight glasses, easy to observe the body running and refrigerant condition;
D, a high linear output;
E all use of corrosion-resistant material, from the inside.

Level control system : level test/ control component use PARKER or DANFOSS

EEV:PARKER/DANFOSSBarrel Pump Supply Coolant for Cold Storage
Unit principle:
Pumps for liquid fluoride is the use of the mechanical function of the pump, transporting cryogenic liquid refrigerant to the evaporator of the refrigeration system. After throttling of low temperature refrigerant liquid, first into a certain liquid volumeof fluorine and certain gas-liquid separation volume bucket, again with f-pump several times to evaporation of cryogenic liquid delivery to the warehouse in the evaporator. Vaporization of liquid evaporator heat and the remaining liquid fluoride returned with vapour suction tube barrel. Gas-liquid separation, gas compressor tosuck, separation and evaporation of the liquid and the equivalent of a new fluid and pump evaporator is fluorine for recycling. Barrel pumps enhance evaporator cooling capacities, ensuring long for fluid, simple, for centralized control, automatedand easy defrost operation and so on.
 
Unit:
Jinan Omori DX series f pump unit imports canned motor pump, the use of moreconvenient for accurate liquid level control system, automatic control system, bringmore economic benefits to the customer.
, Shielded pumps: selection of imported canned motor pump-the secret staircaseg, Empire
A, adopt advanced hydraulic model in Europe, high efficiency, can save users considerable energy consumption;
B, a unique high pressure inner loop structures, ensure the vaporization of liquid fluorine does not;
C, import mask sets, Eddy current losses, roll forming, reliable performance;
D materials, special bearings, extremely high abrasion resistance and corrosion resistance;
E, axial automatic balance, zero axial forces operation, long service life;
F, efficient and simple monitoring and protection device.
 
Second, liquid level control systems: liquid level detection and control units using PARKER, DANFOSS
Liquid level sensor level proportionally into an electric signal and controller work together and then sent to the electronic expansion valve control signal, it is
Display function, feedback and control liquid level of the revolving drum with a stable surface, circular drums is to ensure stability of the oil-rich
Layers, making access to recycling barrels of oil to smooth through gas pipes go back to unit.
 
The control system has the following characteristics:
A, can be remotely monitored and controlled;
B, large cooling capacity range;
C, fast response to changes in the operating conditions for electric valves;
D, fail-safe valve.
 
Electronic expansion valves: selection of PARKER, DANFOSS
A, stepper motors precisely control;
B, high resolution drive Assembly;
C valve body with oil sight glasses, easy to observe the body running and refrigerant condition;
D, a high linear output;
E all use of corrosion-resistant material, from the inside.

For keeping the food safety, there is a very strick hygiene standard for poultry processing plant , especially the employee's personal health management, and hygiene control. 


First: Have to establish employee's personal health records for HR department. 

Second: personal hygiene control
1, according to the training plan for employees of personal hygiene and food safety education and training, new factory staff should focus on systematic training, the assessment of qualified, can mount guard. Training and assessment results should be recorded.
2, employees should develop good personal hygiene habits, do wash hands frequently, and frequently cut nails, take a bath, change clothes frequently, often barber, do not spit everywhere, litter.
3, staff work, unified the trousers, it is forbidden to wear slippers, sandals and other types of open toe shoes; prohibit lipstick, makeup, perfume, nail polish, wearing any jewelry, watches etc.;
4. Smoking, eating, playing, running or chasing slapstick are forbidden in the production area.
5, Staff enter the workshop may not bring anything which nothing to do with the production of goods, first changing shoes, changing overalls, wearing a work cap, work clothes, hats should be dressed neatly, hair must not be exposed outside the coat.
6, Staff hand should be kept clean, and before entering the processing site, after the toilet or hand pollution,washing hand immediately.


6.1 Hand washing disinfection procedures:
A: rinse, rinse with water to scrub, washing hand with liquid disinfectant soak for 20 seconds, rinse and drying
B: rinse, liquid soap scrub, rinse, spray drying, 75% alcohol scrub disinfection


Note: short sleeved overalls should be washed to the elbow


6.2 Employee hands should be kept clean and must be cleaned and disinfected during the production process:
A: after going to the bathroom;
B; after disposing of waste;
C: return to work prior to leaving the work area or having nothing to do with production;
D: before touching the product;
E: after touching other parts of the body that are not clean or unclean;
F: enter workshop and work continuously for 2 hours before start;
G: employees who have direct contact with food must wash hands and disinfect every 1 hours.
7, before entering the workshop, the bottom of shoes and shoes should be soaked and disinfected in the shoes disinfectant pad before entering the workshop.
8, The supervisor inspect labors in the process :   hat, masks, shoe wearing, wearing is according to the specification, the hair is exposed; whether the hand hygiene compliance, the nail should not exceed 0.5mm long; if anyone injured posts are sick posts and so on.
9, the production process of contact with the finished products must wear disposable gloves, gloves should be intact, no damage, impermeable, after hand contaminated, must wash hands disinfection procedures according to the above-mentioned re wash hands. In the work process, packaging personnel must be every 2 hours with 75% alcohol disinfection products and processing the opponent; personnel due to operational reasons, contact exposed of the finished product, every 1 hours with 75% alcohol disinfector.
10, During the production period is not allowed to answer the phone (supervisor, foreman, except) where there is a special need to consult their superiors, call replying have to be outside of production area, after reply the call, the first thing is wash hand before back to work. 
Personal clothing and goods

11 Staff changed clothes is  leave in locker room, not allow enter the  the processing room without working clothes; or not allowed wear working clothes go outside,  pocket and other personal items are stored in locaker room.
12, Wash and disinfect  hands after going to the bathroom, with working clothes, hats, shoes is not allowed goes into bathroom, all must change before and after.

13, non production personnel (ie inspection, management personnel, etc.) and all other people non equivalent to the production is not allowed goes into the workshop


Employee health requirements
1, employees should participate in the annual health examination, inspection qualified to post. Prohibited examination without appointment. Persons suffering from dysentery, typhoid, hepatitis and other infectious diseases of the digestive tract (including pathogen carriers), active tuberculosis, suppurative or exudative skin disease and other disease incompatible with food hygiene, found an immediate dismissal or discouraging.
2, people suffering from respiratory diseases (such as colds, cough), minor can wear masks, but not in direct contact with food; in severe cases, the supervisor or leader to arrange the rest, heal before returning to work.
3, If staff hand's wound , only after dressing wearing disposable gloves can be arranged in direct contact with food; if the wound is deep, the supervisor or leader have to arrange him rest, and heal before returning to work.

Hygiene Equipment

Hygiene Equipment, Hygienical Equipment, Hygiene Machine,Sanitary Equipment, Sanitary Machine

Connect Group For Poultry Project , https://www.connectpoultry.com