PVC Cable Material Masterbatch Granulator Compounding Line
Compounding System Line,Newest Co-Kneader,Co-Kneader Bio-Degradable Compounds,Forming Masterbatch Extruder JIANGSU XINDA TECH LIMITED , https://www.xindaextruder.com
Definition:
PVC cable materials are special pellets that based on PVC resin, added calcium carbonate and other inorganic filler, plasticizers, additives, lubricant additives, etc, after mixing, compounding and extrusion.
Â
Characteristics of product:
1.    High resistance to breakdown strength
2.    Low dielectric loss
3.    Good and stable insulation
4.    Good softness
5.    Good mechanical properties and electric properties
6.    Strong acid and alkali resistance, good chemical stability
Â
Application:
it is suitable for thin plate, wire and cable insulation, seal, etc.
Â
Production line:
Introduction of ATS 65/150 two-stage compounding line
To produce PVC cable materials, we generally use ATS 65/150 two-stage compounding line. ATS 65/150 Two-stage compounding line includes ATE 65 Twin Screw Extruder, ASE 150 Single Screw Extruder and down-stream pelletizing system. The first stage is to realize the polymers compounding job, second stage is to extrude the compounds with gentle and lower temperature, then pelletizing through the down-stream cutting system.
About the pelletizing system
Multiple cutting systems also can be adopted in the ATS 65/150 compounding line. Thanks to the modular design principle, both Instrument control and PLC control are also available to be applied in the ATS 65/150 electrical controlling system. All the key electrical parts adopt European brands to guarantee the controlling system with significant and stable performance.
To produce PVC cable materials, we usually use the pelletizing system: air-cooling die-face hot cutting. It has the advantage: combine high-speech and strong-compounding of twin-screw extruder with low-speech, low-temperature and weak-shear of single-screw extruder. It is the first choice when produce heat-sensitive or shear-sensitive material.
Â
Production process
1. Measuring feeding machineÂ
2. First stage: twin screw extruderÂ
3. Second stage: single screw extruder
4. Air-cooling die-face hot cuttingÂ
5. Cyclone separatorÂ
6. Air cooling extended vibrating screenÂ
7. Metering packaging weigher
Main technical specification:
Machine size
Screw Diameter(mm)
Screw Speed Max.(rpm)
Motor Power(Kw)
Throughput Rate(Kg/h)
ATS65/150
ATE52
62.4
600
90
300-500
ASE150
150
85
45
Â
Characteristics of this set of equipment:
1.    Good mixing effect and the temperature control is convenient
2.    Covers a small area and doesn't need large electricity
3.    Raw material mixing and granulating are entirely automatic, human demand is small
4.    High-safety and can reduce raw materials' damage and deterioration
Â
About our service:
PVC Cable Extruder Before-sale Â
1.    Introduce products and applications detain
2.    Recommend suitable solution
3.    Provide with reference information
4.    Offer lab for test    Â
During Manufacturing         Â
1.    Provide with layout and engineering conditions
2.    Inform the project processing status
3.    Offer other documents
 After-sale
 1. Provide with installation, commissioning and training
2. Register and record customer information
3. Offer spare parts
4. Provide with necessary technical support for new application
5. Visit customer regularly and correct information