40p-60p Chemical and Medicine Industries Plastic PP Flat Top Chain and Sprocket

July 30, 2023

Model NO.: 40P-60P
Belt Width: 20mm
Belt Pitch: 12.7mm
Weight: 1.03kg/M
Per Length: 1.524m
Trademark: GELIN
Origin: Hangzhou, China
HS Code: 3926901000
Model NO.: 40P-60P
Belt Width: 20mm
Belt Pitch: 12.7mm
Weight: 1.03kg/M
Per Length: 1.524m
Trademark: GELIN
Origin: Hangzhou, China
HS Code: 3926901000



 
40P-60P chemical and medicine industries plastic PP flat top chain and sprocket
 

 




Supply unit:1.524mtr (5ft)                           Max speed: 80m/min lubrication 50m/min dry
 
Chain mat.: POM, Temp.: -40° ~90°                 PP, Temp.: +1° ~+98°, acidproof 
 
Working load: 440N (40P plastic chain),880N (60P plastic chain)
 
Main application :  For low noise, lightweight,non-magnetic, anti-static conveyors, used in chemical and medicine industries.  
 

 
Packaging:  
          Inner packing :pack in paper box
          Out packing: Cartons or wooden pallet
          Suitable for sea and inland shipment
          As customers' request


 
40P-60P chemical and medicine industries plastic PP flat top chain and sprocket
 

 




Supply unit:1.524mtr (5ft)                           Max speed: 80m/min lubrication 50m/min dry
 
Chain mat.: POM, Temp.: -40° ~90°                 PP, Temp.: +1° ~+98°, acidproof 
 
Working load: 440N (40P plastic chain),880N (60P plastic chain)
 
Main application :  For low noise, lightweight,non-magnetic, anti-static conveyors, used in chemical and medicine industries.  
 

 
Packaging:  
          Inner packing :pack in paper box
          Out packing: Cartons or wooden pallet
          Suitable for sea and inland shipment
          As customers' request

Thin Wall Mold

cheap plastic injection molds and mould manufacturer 1-Start from part design analysis 2-Mold design drawing and DFM report available so you can see how is the mold going to be before mold making 3-If product is complex,moldflow report will be present as well 4-In house mold making shop ensure you mold quality under well control. 5-Normally it takes 20-40 days to make mold,precise time depends on part design

Thin Wall Mold,Thin Wall Container Mould,Thin Wall Mould,Ultra Thin Wall Injection Molding

Taizhou Zijing Plastic and Mould Co.,Ltd. , https://www.zijingmould.com