Analysis of Failure Causes of Master Controller
with functions like image zooming, free grey value
stretch, contrast gradient stretch, 9fake colors, filter, edge enhancement,
equalization, emboss, threshold value division, negative display, length
measurement, area measurement, grey value display, image marking and noting),
Monitor system(can view all movements inside room during work), Mechanical
system, Electrical system and Protection & alarming system. Can real time
viewing workpiece inspection images to recognize if any failure and failure
type(fo example, crack, slag inclusion, air hole and other). User can save and
do process for collected images directly by software.
High Energy Betatron,X Ray Single High Energy Betatron,Portable Electron Cyclotron Dandong Nondestructive Testing Equipment Co., Ltd. , http://www.ddchinaxray.com
1) The flat cable is damaged due to the failure of the electrical equipment. When the electrical equipment is overloaded, short-circuited, or grounded, it may cause damage to the flat cable.
2) Natural damage. The use of the flat cable exceeds the service life, causes aging of the line, breaks down the insulation layer, and significantly reduces the mechanical strength, causing a short circuit, a disconnection, etc. between the flat cables and causing the flat cable to burn out. The main controller terminal is oxidized and deformed, resulting in poor contact and the like, which can cause electrical equipment to fail to work properly.
3) Human failure. When assembling or inspecting parts of the equipment, the metal object will crush the flat cable and cause the flat cable insulation to crack; the flat cable is in an improper position; the lead position of the electrical equipment is connected incorrectly; the flat cable lead is connected to the wrong position; when the repair circuit fails, Then, indiscriminately cut flat cables and wires.
The above mainly introduces the three types of failures of the master controller, electrical equipment failure, natural damage and human failure, which will lead to the master controller can not be used. If you want to buy controller equipment, our company has a wealth of resources and equipment in this area, may wish to understand! 