PTFE Coated Fiberglass Mesh Conveyor Belt for Tunnel Dryer
Injection Molding Machine For PE PPR Fitting
Its injection volume is large, injection pressure and clamping force are low. The special injection molding machine for pipe fittings adopts servo motor system for hydraulic control. In the production of PPR and PE pipe fittings with long pressure holding and long cooling time, the energy-saving effect is very obvious
Different from the injection molding
machine with variable pump and fixed pump, the energy-saving injection molding
machine uses the servo drive to realize the motor stops working when the
machine does not move. Every time a different action is made, the corresponding
power is used to provide power. It is not as good as the machine does not move.
The servo motor will also stop completely.
High efficiency and energy saving, more money saving
Injection Molding Machine For Pe Ppr Fitting,Desktop Plastic Injection Molding Machine,Plastic Injection Moulding Machine,Injection Molding Press Ningbo Rhea Machinery Co., Ltd. , https://www.mytao-global.com                 PTFE mesh conveyor belt series
We select advanced imported loom,using high-quality imported glassfiber or Kevlar as basic weaving material, coated with excellent PTFE resin to make it into various PTFE mesh conveyor belts.
 
Features of PTFE conveyor belts:
1. High temperature resistance--It can continuously work under-140 to 260ºC, max resist high temperature up to 360ºC
2. Air permeability--It can avoid wasting heat and improve drying efficiency.
3. Chemical resistance--It can resist all most of chemical medicines.
4. Non-Sticky--It can easily remove all kinds of adhesives such as resin, paint and chemical medicines.
5. Good flex fatigue resistance--It has high tensile strength and excellent flex fatigue resistance. It's better for small wheels
 
Applications:
1.Drying machine for non-woven textile, textile printing, silk- printing and dyeing machine.
2.Shrinking machine for garment fabric, high-frequency and UV dryer.
3.Conveyor belt for hot-air dryer, various of food baking, quick-frozen machines.
4.Oiling machine for paper glazing and waxing, plant engineering.
5.Seperating sheet for hardboard production etc.
Â
Model
material
mesh size
Thickness
weight
Temp resistance
Max Width
Tensile Strength
6001
fiberglass
1x1mm
0.5mm
370g/m²
-70-260ºC
4000mm
310/290N/cm
6002
fiebrglassÂ
2x2mm
0.7mm
450g/m²
-70-260ºC
4000mm
350/310N/cm
6004
fiberglass
4x4mm
1.0mm
400g/m²
-70-260ºC
4000mm
390/320N/cm
6004B
fiberglass
4x4mm
1.0mm
450g/m²
-70-260ºC
4000mm
390/320N/cm
6007
fiberglass
+Kevlar4x4mm
1.2mm
600g/m²
-70-260ºC
4000mm
895/370N/cm
6008
fiberglass
4x4mm
1.0mm
585g/m²
-70-260ºC
4000mm
395/370N/cm
6008B
fiberglass
4x4mm
1.0mm
585g/m²
-70-260ºC
4000mm
395/370N/cm
6013
fiberglass
10x10mm
1.2mm
450g/m²
-70-260ºC
4000mm
360/300N/cm
6015
fiberglass
0.5x1mm
0.5mm
420g/m²
-70-260ºC
4000mm
310/290N/cm
6025
fiberglass
2*2.5mm
0.9mm
600g/m²
-70-260ºC
3000mm
390/320N/cm
Â
The unique operating principle of the servo drive + energy-saving heating device, low energy consumption, longer life, and cost saving
The servo drive can output the maximum pressure during the mold clamping, pressure keeping and cooling stages, but keep the speed close to zero, so the power consumption is small and the energy saving is more energy-saving.
The barrel adopts nanometer far-infrared high-efficiency energy-saving heating device, which improves the traditional heating coil's shortcomings of low electric heating conversion efficiency, low thermal conductivity, and high surface temperature. It saves 30%-40% energy compared with traditional heating coils.