What are the tips for maintenance of stage car leaf springs?
Everyone knows that the role of the stage car spring is great. As long as it is usually maintained, it will make us walk more steadily. Springs seem simple, but the role of the stage car is not small, there are some problems and maintenance solutions for the early prevention of the spring, I hope that after the riders understand, you can learn more about the stage car, do it early Prevent it in advance to avoid unnecessary trouble in our maintenance, while saving a lot of expenses. The first point: Due to the high center of gravity of the stage car, a large centrifugal force will be generated at the corner, and if it is too sharp, the centrifugal force will be too large. It directly causes the leaf spring outside the vehicle to go negative, leading to deformation of the vehicle. Therefore, Xiao Bian suggests that owners must slow down when driving and turning. It is best to cross the mid-range to achieve both safety and normal vehicle speed. It also reduces the breakdown of the stage car. The second point: We frequently use the brake function of the vehicle and we will also damage the leaf spring of the vehicle. The reason for this is that when the emergency brake function is activated, the center of gravity of the stage car will deviate, causing the yellow spring force of the leaf spring to become excessive, especially when the front side elastic bar code appears anti-bow, so when braking is applied, it The strength of the bending code exceeds the range used to cause the leaf spring to break. The third point: In the flow of stage vehicles driving at the right speed, but also can save fuel, our safety will be guaranteed. Once the speed of the vehicle is too fast, especially on bad roads, the extent of damage caused by the springing of the steel plate is also greater. Especially the dump truck is more prominent. Therefore, Xiao Bian suggested that we should drive slowly at the lowest level on bad roads, slow down when the vehicles go through the ditch, and firmly oppose the stage car stepping on the brakes to cross the ditch, causing safety hazards. The above are the three main points for Xiaobian to maintain the leaf springs. I hope to help the owners of the stage cars. I would like to pay attention to the stage cars. More information can be found on our official website. Toothbrush machines are specially designed for making toothbrushes. They have compact structures and good stability, and can work at a high speed with high production output. They can finish the tasks of feeding handles, drilling holes, tufting, trimming and grinding the filaments. Haixing Toothbrush Machine can produce brushes with maximum three colors. And one worker can operate several machines at the same time. Toothbrush Machine Toothbrush Machine, Toothbrush Making Machine, Automatic Toothbrush Machine, High Speed Toothbrush Tufting Machine, High Speed Toothbrush Making Machine Yangzhou Haixing CNC Brush Machine Co., Ltd. , https://www.brushmachine.nl