Model NO.: XB-OTS-600A
Display: Digital, LCD ( Linkable to PC )
Control: Computer Control
Weight: 0-100Kg
Power Source: AC220V
Max.Acceleration(G): 17
Max Capacity: 2,5,10,20,50,100,200,500kgf Can Be Setting
Motor: Servo Motor
Test Speed: 1~500 mm/Min Selectable
Stroke Resolution: 0.1mm
Test Stroke: 600mm (Without Grips)
Force Precision: ±0.5%
Trademark: OTS
Transport Package: Standard Strong Wood Case
Specification: 580*580*1250mm
Origin: Guangdong, China (Mainland)
HS Code: 90248000
Model NO.: XB-OTS-600A
Display: Digital, LCD ( Linkable to PC )
Control: Computer Control
Weight: 0-100Kg
Power Source: AC220V
Max.Acceleration(G): 17
Max Capacity: 2,5,10,20,50,100,200,500kgf Can Be Setting
Motor: Servo Motor
Test Speed: 1~500 mm/Min Selectable
Stroke Resolution: 0.1mm
Test Stroke: 600mm (Without Grips)
Force Precision: ±0.5%
Trademark: OTS
Transport Package: Standard Strong Wood Case
Specification: 580*580*1250mm
Origin: Guangdong, China (Mainland)
HS Code: 90248000
Electronic tensile strength tester
Model: XB-OTS-600A
Â
Applicable Industries:
 This machine can test various materials (both finished and semi-finished products ) of tensile strength ,compressive strength and elongation ,can do stripping ,tear strength ,flexural ,compression test and etc. It can connect up to the computer and display or printout the test times , test value , max. value , etc . Also it can make various report forms according to the requirements .
 The testing machine is widely used in all kinds of hardware, metal, rubber and plastics, footwear, leather, clothing, textiles, insulators, wires, cables, terminals and other types of materials, testing, tensile, tear, peel,compression, bending, shear, three-point bending ... and other physical test performance.Â
Â
 Specification :
| Model |
XB-OTS-600 |
| Max capacity |
2,5,10,20,50,100,200,250kgf can be setting |
| Induction method : |
Precision load cell (sensor) |
| Max. Load Capacity  : |
250kgf |
| Force Resolution/Accuracy: |
± 0.5% |
| Accuracy class : |
0.5 |
| Resolution: |
1/1,000,000 |
| Test stroke : |
Max.700 mm( included the fixture) |
| Stroke Resolution: |
0.01mm |
| Speed range: |
0.01-500mm/min |
| Machine Dimension  (W*D*H) |
580*580*1250mm (W*D*H) |
| Weight: |
About 65kg |
| Power : |
1 phase 220V 50Hz |
| Packing |
Standard Export plywood case |
| Displacement Control: |
Displacement encoder count with four frequency technology
So that the displacement of four times
 the resolution can up to 0.0005mm |
|
Force system: servo drives + Servo motor + precision ball screw drive
Â
Control system:Mechanical transmission + TM2101 + Pulse Command and Control System control
Â
Measurement and Control System : TM2101 and control system; master controller uses the most advanced 32-bit ARM processor in the 21st century, the processing speed of the Pentium-class common computer standards, compared to the traditional 8 yuan SCM control system overall performance greatly improved, faster operation, control accuracy higher
Â
Obtain data:Â The key components are used America's most stable and ultra-precision 24 yuan AD, sampling rate of up to 2000 times / sec, can capture the power of instantaneous change process, the entire file, regardless of the resolution of up to 1,000,000 indexing
Â
Software functions:
1. Use windows working platform, set all parameter with dialog forms and operate easy;
2. Using a single screen operation, do not need to change the screen;
3. Have simplified Chinese, traditional Chinese and English three languages,switch conveniently;
4. Plan test sheet mode freely;
5. Test data can be directly appeared in the screen;
6. Compare multiple curve data through translation or contrast ways;
7.With many units of measurement, the metric system and british system can switch;
8.Have automatic calibration function;
9.Have user-defined test method function
10.Have test data arithmetic analysis function
11. Have the function of automatic magnification, to achieve the most appropriate size of graphics
Â
Corresponding Standard:
ASTM D903,F2258,GB/T 2790/2791/2792, CNS-11888,JIS K6854,GB/T 6329,BS EN 14410-2003,YY/T 0729,GOST 21751Â and other standards.
Packing & Shipping
1.Strong standard wood case, inner plastic films wrapped for ensile Strength Testing Machine
Â
2. Usually we delivery the equipment by air,by sea or by express. it depends on customerÂ
Our Services:
We are here to help you.Services available:
Replacement manuals
Consumables and replacement parts
On-site maintenance and repair
Warranty support
Over-the-phone service support and advice
If you have an OTS chamber  , we will do our best to help you in whatever way we can.
Manuals:PDF files of manuals for current models are available free.Please contact us to request a copy.Older and printed copies at additional charge.
Service repair:We prefer you contact us direct at the factory with any problems you may be experiencing.We help diagnose the problem, arrange for any needed parts, and schedule a technician to do the repairs.Rarely can a local contractor get all that done for you as quickly as we can.We also guarantee the work .
Our Company
OTS (Overall Testing System)
Was established in 1978, with 35 years' history
With 30,000 square meter salable production base and 120 employees
Is one of the leading companies solely dedicated to manufacture of
Environmental Simulation Test Chambers ,Physical Testing Equipment .
(such as  constant temperature and humidity chambers, environmental chambers, climatic test chambers, rain and dust test chambers,thermal shock test chambers,fast change rate chambers, salt spray chamber,UV test chambers,walk in test chambers and other special customized test chambers  ;Tensile testing machine, vibration test machine ,carton compression testing machines, bursting strength testing machine etc.) ..
OTS has the equipment and expertise, with own R&D and consultant team, to meet and exceed your testing requirement.With offices in unrivaled quality advantage, dynamic management team with superb manufacturing process,also the quality with the world norms:ISO , ASTM, DIN, EN, GB, BS, JIS, ANSI, UL,CE, TAPPI, AATCC, IEC, VDE...
Â
FAQ:
Q1 :Can you customize the product?
A:Yes, we can customize any products according to requirements.Hot selling lab electronic temperature    humidity cabinet/Environmental climate test chamber also can be customized.
Q2 :How to choose the most suitable products?
A:Our professional team will give you the best suggestion,just be  patiently to tell us the information about  the parameters your required.
Q3 :Can you arrange installations and commissioning in our lab?
A:Firstly, for standard chamber we had 3-5 days commissioning before shipping , you just need link power  in your lab, then can start to operate
 Secondly;We had detailed operation manual with chamber , any problems you can find and solve in it
 Thirdly, some of customized chambers we should to install and teach your team to operate .
If you want to know more information...
Please leave a message below and click " SEND "
Thanks for your time and attention~Thank you!
Electronic tensile strength tester
Model: XB-OTS-600A
Â
Applicable Industries:
 This machine can test various materials (both finished and semi-finished products ) of tensile strength ,compressive strength and elongation ,can do stripping ,tear strength ,flexural ,compression test and etc. It can connect up to the computer and display or printout the test times , test value , max. value , etc . Also it can make various report forms according to the requirements .
 The testing machine is widely used in all kinds of hardware, metal, rubber and plastics, footwear, leather, clothing, textiles, insulators, wires, cables, terminals and other types of materials, testing, tensile, tear, peel,compression, bending, shear, three-point bending ... and other physical test performance.Â
Â
 Specification :
| Model |
XB-OTS-600 |
| Max capacity |
2,5,10,20,50,100,200,250kgf can be setting |
| Induction method : |
Precision load cell (sensor) |
| Max. Load Capacity  : |
250kgf |
| Force Resolution/Accuracy: |
± 0.5% |
| Accuracy class : |
0.5 |
| Resolution: |
1/1,000,000 |
| Test stroke : |
Max.700 mm( included the fixture) |
| Stroke Resolution: |
0.01mm |
| Speed range: |
0.01-500mm/min |
| Machine Dimension  (W*D*H) |
580*580*1250mm (W*D*H) |
| Weight: |
About 65kg |
| Power : |
1 phase 220V 50Hz |
| Packing |
Standard Export plywood case |
| Displacement Control: |
Displacement encoder count with four frequency technology
So that the displacement of four times
 the resolution can up to 0.0005mm |
|
Force system: servo drives + Servo motor + precision ball screw drive
Â
Control system:Mechanical transmission + TM2101 + Pulse Command and Control System control
Â
Measurement and Control System : TM2101 and control system; master controller uses the most advanced 32-bit ARM processor in the 21st century, the processing speed of the Pentium-class common computer standards, compared to the traditional 8 yuan SCM control system overall performance greatly improved, faster operation, control accuracy higher
Â
Obtain data:Â The key components are used America's most stable and ultra-precision 24 yuan AD, sampling rate of up to 2000 times / sec, can capture the power of instantaneous change process, the entire file, regardless of the resolution of up to 1,000,000 indexing
Â
Software functions:
1. Use windows working platform, set all parameter with dialog forms and operate easy;
2. Using a single screen operation, do not need to change the screen;
3. Have simplified Chinese, traditional Chinese and English three languages,switch conveniently;
4. Plan test sheet mode freely;
5. Test data can be directly appeared in the screen;
6. Compare multiple curve data through translation or contrast ways;
7.With many units of measurement, the metric system and british system can switch;
8.Have automatic calibration function;
9.Have user-defined test method function
10.Have test data arithmetic analysis function
11. Have the function of automatic magnification, to achieve the most appropriate size of graphics
Â
Corresponding Standard:
ASTM D903,F2258,GB/T 2790/2791/2792, CNS-11888,JIS K6854,GB/T 6329,BS EN 14410-2003,YY/T 0729,GOST 21751Â and other standards.
Packing & Shipping
1.Strong standard wood case, inner plastic films wrapped for ensile Strength Testing Machine
Â
2. Usually we delivery the equipment by air,by sea or by express. it depends on customerÂ
Our Services:
We are here to help you.Services available:
Replacement manuals
Consumables and replacement parts
On-site maintenance and repair
Warranty support
Over-the-phone service support and advice
If you have an OTS chamber  , we will do our best to help you in whatever way we can.
Manuals:PDF files of manuals for current models are available free.Please contact us to request a copy.Older and printed copies at additional charge.
Service repair:We prefer you contact us direct at the factory with any problems you may be experiencing.We help diagnose the problem, arrange for any needed parts, and schedule a technician to do the repairs.Rarely can a local contractor get all that done for you as quickly as we can.We also guarantee the work .
Our Company
OTS (Overall Testing System)
Was established in 1978, with 35 years' history
With 30,000 square meter salable production base and 120 employees
Is one of the leading companies solely dedicated to manufacture of
Environmental Simulation Test Chambers ,Physical Testing Equipment .
(such as  constant temperature and humidity chambers, environmental chambers, climatic test chambers, rain and dust test chambers,thermal shock test chambers,fast change rate chambers, salt spray chamber,UV test chambers,walk in test chambers and other special customized test chambers  ;Tensile testing machine, vibration test machine ,carton compression testing machines, bursting strength testing machine etc.) ..
OTS has the equipment and expertise, with own R&D and consultant team, to meet and exceed your testing requirement.With offices in unrivaled quality advantage, dynamic management team with superb manufacturing process,also the quality with the world norms:ISO , ASTM, DIN, EN, GB, BS, JIS, ANSI, UL,CE, TAPPI, AATCC, IEC, VDE...
Â
FAQ:
Q1 :Can you customize the product?
A:Yes, we can customize any products according to requirements.Hot selling lab electronic temperature    humidity cabinet/Environmental climate test chamber also can be customized.
Q2 :How to choose the most suitable products?
A:Our professional team will give you the best suggestion,just be  patiently to tell us the information about  the parameters your required.
Q3 :Can you arrange installations and commissioning in our lab?
A:Firstly, for standard chamber we had 3-5 days commissioning before shipping , you just need link power  in your lab, then can start to operate
 Secondly;We had detailed operation manual with chamber , any problems you can find and solve in it
 Thirdly, some of customized chambers we should to install and teach your team to operate .
If you want to know more information...
Please leave a message below and click " SEND "
Thanks for your time and attention~Thank you!
This is a complete compound machinery system of recoveringwaste plastics and reprocessing different materials into recycled pellets, thesystem mainly consist of two segments, washing and pelletizing. The washing ismore complicated than pelletizing, it is started from collecting andtransporting waste materials to the site,the baler and bale breaker are neededto compress and loosen materials, then pre-washing to remove dirt outside ofmaterials, sorting plastics into different groups manually or mechanically,shredding and crushing them into small scraps, further separating them bydensity contrast in the water, some sink and some float, washing is the mostimportant part through different sections in the form of rinsing, friction, hotwashing, etc. The last part of washing is drying materials by centrifugaldehydrator and hot air in drying pipes. Sometimes it also need further processlike removing the metals by metal remover or eddy current separator. But fordifferent materials, the compounding is also different, for example, PET bottles are more complicated than PE/PP film. For pelletizing, the process fordifferent materials is similar,firstly feeding materials into the screw ofextruder which will heat and melt the plastics into strands, then cool thestrands and cut them to get pellets, dewatering and drying the pellets finally,sometimes film materials will be treated by agglomerator in advance, that`sall. For different plastics, the extruder maybe different. For example, PVC and PET normally use Twin Screw Extruder, but PE/PP/PS/ABS usually use Single Screw Extruder.
Plastic Recycling Machine
Pe Plastic Recycling Machine,Pet Plastic Recycling Machine,Pp Plastic Recycling Machine,Pet Recycling Machine
KonRun Extrusion Machinery Technology (Ningbo) Co., Ltd. , https://www.konrunmachine.com