Vane Wheel for Water Meter Spare Parts
pecification Woodworking Machine, Automatic Woodworking Machine, CNC Woodworking Machine Shandong Qufu Xingbang Heavy Equipment Co., Ltd. , http://www.chinaxingbangheavyindustry.com
plastic material
Multi-jet Dry Type Vane Wheel Water Meter
It is a multi-jet super dry water meter for residentialÂ
application in sizes 15mm-20mm for cold  and hot meter.
Features
Compact design with smaller meter body.
Brass body is only 570g weight for save cost
45° inclined register, hot wire tamper proof.
Magnetic drive mechanism with anti-magnetic protection.
External regulation device
Standards ComplianceÂ
Directive 2004/22/EC on measuring instruments;Â
the European  Standard EN14154+A1+A2: Water Meter;Â
the International  Organization of Legal Metrology OIML R-49: 2006(E)
Optional FeaturesÂ
Several lengths and connections available on request
Non return Valve
Reed switch option
Working Conditions
Water temperature: ≤50ºC for cold water meter Â
                   ≤90ºC for  hot water meterÂ
Water pressure:   ≤1MPa or 1.6MPa optional
          (10bar or 16bar option)
Accessories
Each meter has one set coupling optional: 2pcs coupling, 2pcs coupling nuts and 2pcs washers.
Installation requirements
The meter should be installed in horizontal position with the direction of the flow asÂ
indicated by the arrow cast in the meter body with the register face upwards.
Pipeline must be flushed before installation.
The meter should be constantly full of water during operation.
Maximum Permissible Error
In the lower zone from Qmin inclusive up to but excluding Qt is ±5%.
In the upper zone from Qt inclusive up to and including Qs is: cold water meter ±2%.
DN(mm)
Â
15
20
Size(inch)
Â
1/2"
3/4"
Q4(m³/h)
Â
3.125
5
Q3(m³/h)
Â
2.5
4
R80
Q2(l/h)
50
80
Â
Q1(l/h)
31.25
50
R100
Q2(l/h)
40
64
Â
Q1(l/h)
25
40
Max.Reading (m³)
9999
Min.Reading (Liter)
005
Max.Pressure (bar)
16
Pressure Loss (ΔP)
63
Max.Temperature
T30 or T90
Â
Sawing length 2800/3300/3800MM Saw carriage astern speed 120M/MIN
Sawing thickness 100MM Main saw drive motor 15KW
Main saw diameter Φ350MM-Φ450MM Groove saw drive motor 2.2KW
Main saw shaft diameter Φ75MM Saw carriage servo motor 1.5KW
Main saw Speed 4800M/MIN Feeding servo motor 1.5KW
Groove saw diameter Φ160MM High voltage air supply motor 2.2KW
Groove saw shaft diameter Φ45MM Automatic feeding speed 70M/MIN
Groove saw speed 6300M/MIN Air pressure 7-8KG/CN²
Saw carriage cutting speed 0-100M/MIN Weight 5200KG/5800KG
Power 380V/50-60HZ
Touch screens languang English&Chinese