Marine Fender Foam Filled Fender Rubber Fender
Oil Pan Gasket function is to seals the oil pan to the bottom of the engine. Oil Pan Gasket Oil Pan Gasket,Non Asbestos Oil Pan Gasket,Oil Pan Seal Gasket,Truck Oil Pan Gasket HAFID INTERNATIONAL LIMITED , https://www.hapgasket.com
It's a new polymer synthetic material between rubber and plastic, with both high strength of plastic and long range elasticity of rubber.
1. High wear resistance. 3-5 times that of natural rubber
2. High oil resistance, 4 times that of NBR-Nitrile butadiene rubber
3. High mechanical strength. Its tensile stress at break, tear strength and load bearing ability are many times higher than those of common rubber.
4. Excellent resistance to acid, alkali, low temperature and solvent.
5. High metal-bonding strength
6. Wide hardness range. It can be adjusted at will within elastic domain Shore A 10- Shore A 100
The most distinguishing characteristics of foam filled fender:
1. Having the capability of floating, not easily influenced by the ebb and flow of the tide.
2. Bright colors. Various colors are offered according to the customers' demands.
3. Compared with inflatable fender, it boasts the characteristics of safety and maintenance-free with working life as long as 10 to 15 years, wanting no inflating, resistant to scratching, pricking, friction, sea water, acid and alkali.
4. Solid but light, easy to install and move.
5. When compressed to 60%, reaction force grows obviously from little to largeness, and energy absorption is very high.
Oil Pan gasket Material: Cork, Framework Rubber, Metal Rubber. Sealing Paper,
1 CORK: Cork material is the earliest used in the oil pan seal. The most widely applied, Is a highly applicable sealing material. It is feather is: simple process, raw material is simple and easy. Low cost.
But a wide range of apply does not mean it`s fully suited to the oil pan seal.
Its disadvantage is also very obvious: Easy to leak; Easy to pressure explosion when install the screws.
European and American manufacturers have no longer use this material many years ago, but the aftermarket still have a huge inventory fort this cork oil pan gasket.
2 RUBBER: Rubber oil pan gasket is widely used in the foreign maintenance market, It`s a very nice sealing material, The specific material can be: NBR, ACM,FKM. European cars prefer to use rubber oil pan gasket, such as Mercedes-Benz, Audi, and Volkswagen and so on.
3 Sealing Paper: Sealing paper oil pan gasket is a new material, it`s performance stable, good sealing effect, Suitable for flat sealing. The US repair kits form TTK,ATC,TRANSTEC etc- are mostly use this sealing paper material.
4 Metal Rubber: Also named as module rubber, hard rubber, its use metal as a skeleton and coated with rubber outside, representative one like 4T65E, This is a new trend of the oil pan gasket, It combines the advantages of rubber material and avoid the disadvantage of not easy to fix. At present United States almost all new transmission box is use this metal rubber sealing gaskets. This is also widely used in the engines.