Full Auto Plastic Little Bottle /Toys Blowing Machine Good Prices
plastic bottle making machine Automatic extrusion blow molding machine Plastic blow molding machine ABLB45II is mainly designed for making various kinds of plastic containers such as : oil bottles,lubricant bottles,detergent bottles,cosmetic bottles,plastic balls so on. Double station and single die head design make the output higher and more efficient. Technical Parameters: ( ABLB45II)  Basic parameters Suitable material PE.PP,PVC,PS,PETG,so on Max volume 500ml Output capacity 11000pcs/day Size 2.6×1.4×2.2(M) Weight 2.8T system Specification Parameters Note Plasticizion system Summarize High efficient low power consumption plasticizion system,transducer control,self-protect function when started at low temperature  Reducer Hard finishing,High intension,Low noise reducer  Screw 45mm,L/D ratio 28, 38CrMoALA Cooling system available Plasticization 65Kg/H PA Heating Zone 3 Aluminum Heater Automatic heating Heating power 3KW/H  Extrusion Motor Three phase asynchronous motor (380V,50HZ)  Cooling Fan 3zone Automatic cooling   Extrusion system Summarize High-grade alloy steel, center feeding  Die head number 1  Center distance of die heads /  Max die mouth 80mm  Heating zone 7 Stainless steel heating cycle  Heating power 3KW  Clamping system Summarize  High intension, rigidity, center mold locking, stable mould opening and clamping system  Clamping force 32KN  Template distance 80~350mm  Max mould size 250X320mm  Mould material High grade 50# steel  Electric system Summarize PLC+ touch screen(man-machine interface)standard extrusion blow molding machine controlling system(AUTO monitoring, fault-alarm, auto counting ,auxiliary function available) Japanese OMRON PLC system Operate interface Touch screen, automatic self-diagnose alarm system  Temperature control Automatic temperature control module  Movement control Japanese OMRON, Chinese/English Version  Electric protection Ampere overload, electric short circuit self-protection function  Hydraulic system Summarize Multiple function hydraulic integrated block Proportional control, high efficient  Oil pump motor Three phase asynchronous motor (380V,50HZ)  Oil pump Imported double pump  Valves Imported oil pump valves and connections  Oil pipes Double layer overpressure resistant  System pressure 60Kg/cm²  Cooling system Separate water cooling cycle, oil cooler cooling system  Pneumatic system Summarize Taiwan AIRTAC pneumatic system  Air pressure 0.6Mpa  Air displacement 0.6M3/min  Electromagnetic valve AIRTAC  Cooling system Summarize Separate cooling system of mould, barrel and oil system  Cooling medium Water  Water flow 60L/min  Water pressure 0.3-0.6MPa   Delivery no later than 30workingdays, after we received the deposit. Packing: Standard export packing for sea freight by 20' CY  WARRANTY: We warranty the quality of this machine for 12 months ,if there is any problem with the machine ,or any main parts are broken, we will repair it or replace new for free.  The seller should train two or three operating man for free. (Travel and hotel is by buyer's expenses.)  The buyer should place the machine to the right position and inform the supplier after the machine reach the buyer's factory. The seller will send the engineer to test run the machine until it is running in normal state. The buyer will bear his round-trip air tickets, accommodation, and hotel and so on in BUYER'S side. Besides,the buyer will pay 50USD/day/person for technology fee.  The offer is valid for any order placed within a period of 30 days. Unless otherwise stated, all conditions and terms are based on this list.    Bevel Box,Portable Digital Tilt Box,Display Angle Box,Digital Tilt Box Jinyi , https://www.kingangle-jy.com
extrusion bottle blow molding machine was specially designed for making plastic water bottles, lubricant oil bottles, detergent bottles, plastic toys and other plastic containers not over 2L.
The features of this machine:
(1)It is suitable for producing PE, HDPE, PP, PVC, PETG, PS so on, plastic containers and bottles in all shapes are available, the max. Product volume is up to 8L.
(2)Single station single die head design, very easy to operate and maintenance.
(3)Most components of the blow moulding machine are from famous world brand.
(4)Fully automatic process with low power consumption, high efficiency, quick and safe operation, easy for maintenance.
(5)Multiple screw available for double layer or tranparent liquid lever line.
(6)Auto deflashing device available, can remove the extra parts of bottles.
(7)Auto lubricant system controlled by PLC.Specifications
1.good after-sale service
2.advanced technology
3. in enormous quantities
This type machine can produce fllowing products:
Â
DELIVERY:
TRAINNING:
INSTALLATION AND TEST
VALIDITY OF OUR OFFER: