How to replace the potentiometer burette
Polyethylene tubing film is made of high-quality HDPE or LDPE. The width of the roll can be 200 mm to 1000 mm, thickness from 10 micron to 70 micron. The weight of each roll usually from 5 kgs to 20 kgs. It is suitable for packing and provides good scratch protection to its contents . The size, thickness, material, color and packing could be produced according to customer's requirement. And it could also been printed with LOGO, image or unique design as customized.
Shrink Film Tubing, Poly Film Tubing, Shrink Wrap Tubing, Electrical Shrink Wrap, Pvc Heat Shrink, Rubber Shrink Wrap BILLION PLASTIC MANUFACTURING CO.,LTD, JIANGMEN , https://www.jmtrashbag.com
Replacement steps:
1, after connecting the instrument, start the display welcome interface;
2, install, remove the buret press "clear" key, the buret return to the zero position is in a removable state;
3. Press “CLEAR†key to start this function in the waiting state, the burette will automatically stop after returning to zero position. This function is used in waiting state;
4. The left and right arrows on a single keyboard can make the reversing motor rotate clockwise or counterclockwise in a single-step manner to adjust the deflection angle of the reversing shaft. 5. When removing the burette, remove it in the direction of the operation manual. When installing the burette, Be sure to hear the "click" sound after the right position, or need to push it back;
6, after installation, locking burette can be used behind.
