Wire and cable maintenance and storage methods - Tianjin Kitten
Nanpi Jiantong Hardware Manufacturing Co.,Ltd. offers a wide range of metal brackets, include Angel brackets, corner brackets, L brackets, Steel Brackets, U shape brackets, solar brackets.
Material grade: stainless steel 301, stainless steel 304
Al5052,6061
steel DC01,DC04,ST12,Q235,SJ235R
galvanized steel sheet DX51D
Stock thickness ranges from 0.30mm-6.0mm for stainless steel
0.30mm-6.0mm for aluminum
0.20mm-6.0mm for carbon steel
Surface finishing: polishing, satin blasted, powder coating, electro plating, anodize
Application: connectors, mounting brackets, supports, chassis parts ..etc.
Metal Bracket,Aluminum Bracket,Stainless Steel Bracket,Steel Brackets Nanpi Jian Tong Hardware Manufacturing Co., Ltd. , https://www.sheetmetals.nl
First, the cable should not be exposed to moisture, heat, corrosion or bumps.
Second, the cable used for a certain number of years should pay attention to inspection, found that the problem should be promptly replaced.
Third, the cable should not be overloaded.
Fourth, always check the use of electrical and wiring in the home, timely maintenance and overhaul.
Fifth, for the old building's lines, found to be flooded or wet, especially when the line is out of repair and ageing, it should be immediately repaired by an electrician.
6. For lines that are prone to flooding, electricians should be asked to relocate the lines and take elevated and moisture-proof measures.
VII. In case of power failure in rainy days, the power should be cut off immediately. Please have an electrician examine the cause and send someone to take care of it.
Method of maintenance of cable equipment 1. Clean and clean the surroundings of the machine at any time. There must be no oil, water, or materials or products on the ground. The waste products produced in the production are collected in time and quickly processed.
2, the machine surface wipe clean and whether the machine is well maintained, the first to see whether the machine surface is always kept clean, whether the tool is placed according to regulations, the machine surface is placed should not be placed on the items;
3, lubricating oil or cooling oil added according to regulations, and often check whether the oil supply system is open;
4. During the operation of the machine, if there is any abnormal sound or vibration, the fasteners are frequently checked and tightened;
5. When the drive belt is loose or deteriorating, it should be replaced;
6. All machine safety doors, safety fences, safety covers, safety switches, limit devices, etc. are complete and normal;
7. According to the requirements of the inspection card, the operator must do "three good" and "four meetings"; that is, it should be well-managed, well-used and well-maintained; it will be used, checked, maintained, and troubleshooting will be eliminated.