Hydraulic universal testing machine

Hydraulic universal testing machine

Function introduction:

The microcomputer screen display hydraulic universal testing machine is a high-rigidity mainframe structure under the cylinder. The disc motor drives the turbine to drive the wire to move up and down along the screw, adjust the test space, the servo cylinder adopts gap sealing, and the static pressure support oil film has no friction guiding. technology. Test machine dedicated plug-in full digital display test machine control system, manual loading test force, microcomputer screen display processing test results, automatic analysis and processing test data. Metallic material for stretching, compression, bending, shear test. The on-screen display measurement and control system has a network interface.

Main Specifications:

1. Maximum test force: 300kN;

2. Test force measurement range: 2% - 100% FS;

3, test force indication accuracy: indication accuracy ± 1%;

4, the maximum stretching space: 600mm;

5, the maximum compression space: 500mm;

6, flat sample clamping thickness: 0-15;

7. Round sample clamping diameter: Φ10-Φ32;

8, piston displacement indication accuracy: ± 0.5% FS. ;

9, deformation measurement resolution: 0.001 mm;

10, deformation measurement accuracy: ± 1%;

11, sensor: oil pressure sensor, extensometer;

12. Control mode: electro-hydraulic servo closed-loop control, the control mode can be smoothly switched;

13. Display mode: the computer screen displays the test force, piston displacement, sample deformation measurement value, the screen displays the test curve, the screen is zeroed and calibrated;

14, the host size: 940mm × 630mm × 2010mm;

15, the size of the control cabinet: 1020mm × 620mm × 810mm;

16, the host weight: 2500kg;

17, total power: 2.5kW.

Main configuration:

1. Hydraulic universal testing machine host

2, hydraulic universal testing machine standard oil source

3, electro-hydraulic servo full digital PC controller

4, test machine dedicated PC measurement and control card

5, the printer

6, electro-hydraulic servo valve

7, electrical control box (integrated with the oil source)

8, pressure sensor

9, gauge length 50mm extensometer

10, cylinder piston displacement sensor and connecting parts

11, all digital servo control software

12, multi-function test data processing software package

13, pipeline

14. Attachment (stretching, compression, bending and installation spare parts)

Operating procedure

a) Dial selection: The maximum load should be estimated before the test, and the corresponding measurement range should be selected so that the ultimate load at the time of failure is controlled between 20 and 80% of the grade disc.

Measuring range suspension é“Š 0~10KN A 0~20KN A+B 0~50KN A+B+C

(2) According to the system used, the “calibration” item is optional.

(3) Open the file and follow the instructions of the file.

(4) Enter the sample size before the test.

(5) New test: save the current test results and start a new test.

(6) Preservation: Manually save the test data, launch the system for new test, and automatically save the test data when the test data is opened.

(7) At the end of the test, check whether the machine is running normally. Exit the program first, turn off the computer, and finally turn off the power of the industrial control box. And make a record of equipment usage.

Operational precautions

(1) The connection line between the computer and the host must be checked before starting the machine.

(2) When using a computer, please do not read or write floppy disks that are not related to this machine in the future to prevent computer virus infection.

(3) Do not leave the position after the machine is running.

Surface Treatment Parts Processing

Part Of The Process,Surface Treatment Parts Processing,Matte Electrophoretic Paint Parts Processing,Wire Drawing Parts Processing

Dongguan Kingswin Wing Tat Metal Products Co., Ltd. , https://www.milling-turning.com