New Invention of Machinery at Geneva International Invention Exhibition
Tallow Amine,Primary Amine,Tallow Alkyl Amine,Fatty Primary Amine Sichuan Yibin United Import & Export Ltd. , https://www.ybund.com
Rebar clamps: Prior to the pouring of reinforced concrete, steel reinforcements are first laid and fixed with iron wire. This work requires skilled workers to bend over and bow back.
The inventor designed the rebar clip holder named CLINCHA which is an air pressure holder with a weight of 5 kg. It can fix the steel bar clamp on the steel bar connector like a baler and it takes only 0.5 seconds. Using such a fixture, the operator does not need skilled techniques, and does not need to bend over to work, which can reduce labor intensity and speed up progress while also protecting worker safety and site cleanliness.
Excavation smash grapple: When excavators are used to excavate and load vehicles on the construction site, they encounter rocks or cement blocks and can only load and unload these stones. The BF120-4 clamshell designed by the Italian MB Company integrates the excavation and crushing functions. The front half excavation port is the same as the ordinary clamshell, and the rear half excavation port is equipped with a clam plate type crush plate. The excavator equipped with this grab can smash the stones like the ore crusher when unloading the earth.
Automatic lift discharge welding mask: The welder must hold the welding torch in one hand and hold the welding part in one hand. It is very inconvenient to lift and lower the helmet welding mask frequently. The automatic inflator mask designed by the Iranian inventor transmits the signal to the receiver on the side of the welding helmet goggles by means of a remote control button attached to the arm of the welding torch. The mask can then be lifted or lowered automatically.
Wipe the wall of the brick box: masons use cement to fill the wall and brick seams are usually holding the cement plate in one hand, holding a trowel in one hand, the cement will inevitably be scattered on the ground. The Belgian inventor designed the handle plastic tray to put cement on it like a lunch box, aligning the outlet of the tray with a wall joint, and using a T-shaped scraper to push the cement out of the tray outlet with the same width as the wall seam and squeeze it into the wall joints. in.
Bianmu steel brazing: The use of an axe to pry tree stumps into wooden blocks is a force that requires “steadiness, accuracy, and precisionâ€. The German inventor designed a 10 kilogram steel cover for beech wood. When using, follow the steel braces and lift the steel sleeve to the handle to loosen it. The steel sleeve will run along the braze to the bottom, and the impact force is no less than the big ax.
Transport clip: The British inventor designed the clip to add a handle to the trapezoidal iron frame. When moving a stone, large brick or cement column, two people use two carrying clips to cover one end of the bar, the lower part of the door-shaped iron frame buckles the bottom of the bar, and the handle fixed on the crossbar of the door-shaped iron frame lifts. With the bottom of the handle pressed against the stone, the stone can be lifted.
Hand-held vise: The bench vise is fixed on the console. The British inventor designed the hand vise to clamp the object to be processed. After tightening the fixing screw on the handle, hold the handle in one hand and use one tool to process it. This eliminates the need for someone to help grip the processed object.
(Source: Xinhuanet Geneva April 19 special power)