What are the parts of the thread cutting machine operation?
The[SCALBYE" gives you whole home protection from the adverse effects of scale buildup. helping to prolong the lifespan of your appliances,such as plumbing, washing machine, dishwasher, water heater, and other appliances ,also trimming costs on bills and repairs.
1.Effectively adsorbs chlorine, chloramine, difficult chemicals, dangerous VOCs and THMs contaminants.
2.Prolong the lifespan of appliances
3.Treat your body with luxurious spa quality water for noticeably healthier,
4.smoother skin and hair.
5.No electric
6.No Salt Needed & No Water Wasted
7.Easy to install
Salt Free Water Conditioner,Water Filter Conditioner For Sink,Salt Free Water Filter,Salt Free Water Softener Filterelated Corp. , https://www.nbfilterelated.com
2, when the mother slot type knife cut the background, can not let the molybdenum wire touch the blade in the process, it should be the angle of the cutter is greater than the angle of the diamond chip processing, mainly to avoid the processing process, the bad film, processing The main part is the body, that is, the part that carries the diamond chip. The purpose is to make the knife not touch other parts when processing the wooden floor. It also facilitates chip removal during processing.
3, on the summary of the so-called knife Let the knife: refers to the master slot knife to open part. Molybdenum wire should be adjusted vertically when processing. Molybdenum wire is adjusted vertically by placing the clamp close to the molybdenum wire so that the molybdenum wire is completely attached to the surface of the jig.
4. Summary of the inclined platform The so-called inclined platform refers to the side of the upper blade. Purpose To avoid hitting other parts when processing wood flooring.
5, on the processing process should pay attention to the details. 1) Each time the processing is completed, the XY value of the stoppage time must be viewed to facilitate the processing of the next tooth, and the quality of the processing can be judged. At the same time, if there is a problem, it can be adjusted in time. 2) When installing the workpiece, wipe the surface of the tool and the surface of the fixture to ensure the contour of the tool.